Multi-Diag Access J2534 Maximize

Multi-Diag Access J2534

10 Items in stock

Multi-Diag Access J2534 Pass

 

Multi-Diag Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.
Beside ECU reprogramming, with the help of Multi-Diag Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions!

 

 

 

Multi-diag Language
Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.

 

 

 

Multi-diag j2534 Characters:
ully compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 mA)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
On-board memory

 

 

 

Multi diag Functions:
After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):
- Maintenance,
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter
- Air Conditioning,
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators
- Pollution control,
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe,
- Liaison to the ground,
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)
- Body,
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar
- Post-Equipment
Setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system,
- Braking,
Diagnosis of calculators ABS, ESP,
Diagnosis and unlock electric brakes,
Flush the brake system,
- Motor,
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors,
Electronic configuration of the EGR valve
- Expert Mode,
Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.

 

 

 

Multi diag tool Package including:
VCI (Vehicle Communication Interface)

DB25 to OBD-2 Male cable
OBD2 Male to OBD2 Female cable
DIN6 to USB cable
DIN6 to DB9F cable
Carrying case

 

 

 


 


multi-di@g scanner (1).jpgmulti-di@g scanner (9).jpgmulti-di@g scanner (10).jpgmulti-di@g scanner (11).jpgmulti-di@g scanner (7).jpgmulti-di@g scanner (4).jpgmulti-di@g scanner (12).jpgmulti-di@g scanner (5).jpgmulti-di@g scanner (8).jpgmulti-di@g scanner (3).jpgmulti-di@g scanner (6).jpg
Software display :
 

multi-di@g scanner (13).jpgmulti-di@g scanner (14).jpgmulti-di@g scanner (18).jpgmulti-di@g scanner (15).jpgmulti-di@g scanner (16).jpgmulti-di@g scanner (17).jpg